-
Safety Precautions:
- Put on safety goggles, gloves, and a dust mask to protect yourself from dust and debris generated during the polishing process.
-
Clean the Surface:
- Start by cleaning the granite surface thoroughly to remove dust, dirt, and any surface stains. Use a mild stone cleaner and a soft cloth or sponge. Rinse the surface with clean water and allow it to dry completely.
-
Choose the Right Diamond Pads:
- Select the appropriate diamond polishing pads with different grit levels. Typically, you'll start with a lower grit (e.g., 50 or 100) to remove imperfections and gradually work your way up to higher grits (e.g., 200, 400, 800, 1500, and 3000) for a finer polish.
-
Attach Diamond Pads to the Polishing Machine:
- Attach the chosen diamond polishing pad to the polishing machine or grinder with variable speed. Make sure it is securely fastened.
-
Wet Polishing:
- Wet the granite surface with water before starting the polishing process. This helps cool the diamond pad and prevent overheating. You can use a spray bottle to mist the surface as you work.
-
Polishing Process:
- Start the polishing machine at its lowest speed, and gently run the diamond pad over the granite surface in a circular motion. Apply even pressure, but avoid pressing too hard to prevent damage.
- Begin with the lowest grit diamond pad and progress to higher grits one by one. Make several passes with each pad, ensuring that the entire surface is polished evenly.
- Continue the process until you've used all the desired grit levels, gradually achieving a finer and smoother polish with each pad.
-
Clean the Surface Again:
- Once you've finished polishing with the highest grit pad (usually 3000), clean the surface with water to remove any residue and debris from the polishing process. Dry it thoroughly with a clean, soft cloth or towel.
-
Optional Sealing:
- If desired, apply a granite sealer to protect the polished surface from stains and moisture. Follow the manufacturer's instructions for the specific sealer you're using.
